Papers - Inasaki, Ichiro
-
ＣＢＮ砥石による間欠ドレッシングクリープフィード研削
会田，稲崎，小林
日本機械学会論文集(C) Vol.54 ( No.503 ) 1590 1988
Research paper (conference, symposium, etc.), Joint Work
-
Hybrid Machining of Hard and Brittle Materials
S.Koshimizu, I.Inasaki
Journal of Mechanical Working Technology Vol.19 333 1988
Research paper (scientific journal), Joint Work
-
Application of Adaptive Noise C-ancelling Technique to the Diagnosis of Rolling Element Bearing
L.Xiao, I.Inasaki, Q.Liaugshen
Prof. of the International Symposium on Automation and Robotics in Production Enginerring 1988
Research paper (conference, symposium, etc.), Joint Work
-
A Computer Simulation Method for Dynamic and Stability Analysis of Air Bearings
G.Lin, T.Aoyama, I.Inasaki
Wear Vol.126 307 1988
Joint Work
-
工作機械テーブルの振動特性
伊藤，青山，稲崎
日本機械学会論文集(C) Vol.54 ( No.506 ) 2375 1988
Research paper (conference, symposium, etc.), Joint Work
-
表面絞り形静圧スラスト空気軸受の特性解析
林，青山，稲崎
日本機械学会論文集(C) Vol.54 ( No.508 ) 3031 1988
Research paper (conference, symposium, etc.), Joint Work
-
ファインセラミックスのスピードストローク研削
鄭，稲崎，松井
日本機械学会論文集(C) Vol.54 ( No.505 ) 2265 1988
Research paper (conference, symposium, etc.), Joint Work
-
Development of a Condition Monitoring System for Cutting Tool using an Acoustic Emission Sensor
T.Blum, I.Suzuki, I.Inasaki
Bulletin of the JSPE Vol.22 ( No.4 ) 301-308 1988
Research paper (bulletin of university, research institution), Joint Work
-
Speed Stroke Grinding of Advanced Ceramics
I.Inasaki
Annals of the CIRP Vol.37 ( No.1 ) 299 1988
Single Work
-
A Practical Mounting Device for an Acoustic Emission Sensor for the Failure Detection of Multipoint Cutting Tools
I.Inasaki, T.Blum, I.Suzuki, H.Itagaki, M. Sato
Advances in Flexible Automation and Roboti-cs,(Ⅱ), ASME 1017 1988
Joint Work
-
表面絞り形静圧空気軸受の負荷特性と最適設計
林，青山，稲崎
精密工学会誌 Vol.53 ( No.4 ) 619 1987.04
Research paper (conference, symposium, etc.), Joint Work
-
ファインセラミックスの高能率研削に関する基礎研究
鄭、稲崎、松井
日本機械学会論文集 53 ( 485 ) 209-216 1987
Research paper (conference, symposium, etc.), Joint Work
-
ファインセラミックスのクリープフィード研削
鄭，稲崎，松井
日本機械学会論文集 Vol.53 ( No.491 ) 1571 1987
Research paper (conference, symposium, etc.), Joint Work
-
Basic Stady of High-Efficiency Grinding of Advanced Ceramics
Jung, Inasaki, Matsui
Proc. of the 6th ICPE 27 1987
Research paper (conference, symposium, etc.), Joint Work
-
A Cutting Condition MonitoringSystem with the Casability to D- etermine and Leam Characteristic Parameters of Cutting Tool Wear
Blum, Inasaki
Proc. of the 6th ICPE 1987
Research paper (conference, symposium, etc.), Joint Work
-
Entwicklung von ultraprazisen W erkzeugmaschinen in Japan
Inasaki
V. Internationales Braunschweigerkolloquim 1987
Single Work
-
Study of Oil-Air Lubrication of High-Speed Ball Bearing System for Machine Tool Application
T.Aoyama, I.Inasaki
Proc. of the NAMRC 558 1987
Research paper (conference, symposium, etc.), Joint Work
-
Trajectory Generation and Control of the Fire-Bar-Link Parallel Direct-Drive Robot
Y.Konishi, T.Aoyama, I.Inasaki
Proc. of the International Conference on the Manufacturing Science and Technology of the Future, Combridge 46 1987
Research paper (conference, symposium, etc.), Joint Work
-
Dynamic Characteristics of Machine Tool Table
T.Ito, T.Aoyama, I.Inasaki
Proc. of the KSME/JSME Conference, Soeul, P.138 1987
Research paper (conference, symposium, etc.), Joint Work
-
Development of Spidle System with Adjustable Preload Mechanism Using Piezoelectric Actuator
S.Tsutsui, T.Aoyama, I.Inasaki
Proc. of the PSME/JSME Conference, Manila 1987
Research paper (conference, symposium, etc.), Joint Work