Papers - Inasaki, Ichiro
-
Investigation of Adsorption Behavior of Lubricants in Near-Dry Machining
S.Min, I.Inasaki, S.Fujimura, T.Wakabayashi, S.Suda
Journal of Engineering Manufacture Vol.219 ( B9 ) 665-671 2005
Research paper (conference, symposium, etc.), Joint Work
-
Basic Study on Development of Sensor to Detect Cutting Force Components Based on Villari Effect
H.Aoyama, A.Aoyama, I.Inasaki
Transactions of NAMRI/SME Vol.28 323-328 2005
Research paper (conference, symposium, etc.), Single Work
-
A Study on Tribology in Minimal Quantity Lubrication Cutting
S.Min, I.Inasaki, S.Fujimura, T.Wada, S.Suda
Annals of the CIRP Vol.54 ( No.1 ) 105-108 2005
Research paper (conference, symposium, etc.), Joint Work
-
Dry Machining and Minimum Quantity Lubrication
K.Weinert, I.Inasaki, J.W.Sutherland, T.Wakabayashi
Annals of the CIRP 53 ( 2 ) 511-538 2004.08
Research paper (scientific journal), Joint Work, Accepted
-
A Controlled Atmosphere Cutting Apparatus for Understanding Tribological Behavior of Lubricants in Near-Dry Machining
K.Hayashi, I.Inasaki, T.Wakabayashi, S.Suda, S.Suzuki, H.Yokota, T.Aoyama, M.Nakamura
Key Engineering Materials 257-258 9-14 2004
Research paper (conference, symposium, etc.), Joint Work
-
Multifunctional Application of a Synthetic Ester to Machine Tool Lubrication Based on MQL Machining Lubricants
S.Suda, T.Wakabayashi, I.Inasaki, H.Yokota
Annals of the CIRP Vol.53 ( No.1 ) 61-64 2004
Research paper (conference, symposium, etc.), Joint Work
-
Tribological Characteristics and Cutting Performance of Lubricant Esters for Semi-Dry Machining
T.Wakabayashi, I.Inasaki, S.Suda, H.Yokota
Annals of the CIRP Vol.52 ( No.1 ) 61-64 2003
Research paper (conference, symposium, etc.), Joint Work
-
超音波振動を付与した複合材料の切削加工
米澤、稲崎
日本機械学会論文集Ｃ編 69 ( 682 ) 243-248 2003
Research paper (conference, symposium, etc.), Joint Work
-
ＣＭＰによるシリコンウエハの平坦化に関する研究
佐々木、青山、稲崎、柴谷
日本機械学会論文集Ｃ編 68 ( 674 ) 268-274 2002
Research paper (conference, symposium, etc.), Joint Work
-
Investigation and utilization of the acoustic emission signal for monitoring the dressing process
M.Wehmeier, I.Inasaki
Journal of Engineering Manufacture Vol.219 ( No.B9 ) 543-551 2002
Joint Work
-
A Synthetic ester as an opitimal cutting fluid for minimal quantity lubrication machining
S.Suda, H.Yokota, I.Inasaki, T.Wakabayashi
Annals of the CIRP Vol.51 ( No.1 ) 95-98 2002
Joint Work
-
Performance of HSK tool interfaces under high rotational speed
T.Aoyama, I.Inasaki
Annals of the CIRP Vol.50 ( No.1 ) 281-284 2001
Joint Work
-
Grinding Chatter- Origin and Suppression
Annals of the CIRP Vol50 ( No.2 ) 515-534 2001
Joint Work
-
Cutting of CFRP with Ultrasonic Vibration
Proceedings of the 1st International Seminar on Progress in Innovative Manufacturing Engineering, Genoa, Italy 77-80 2001
Research paper (conference, symposium, etc.), Joint Work
-
Performance of HSK Tool Interface under High Rotational Speed
T.Aoyama, I.Inasaki
Annals of the CIRP Vol.50 ( No.1 ) 281-284 2001
Research paper (scientific journal), Joint Work
-
Milling and Drilling with Minimal Quantity Lubrication
Proc.of theInternationalConference on ImprovingMachine Tool Performance,France 2000.07
Research paper (conference, symposium, etc.), Single Work
-
Dicing of Silicon Wafers
I.Inasaki
Proc.of 3rdInternational ConferenceonMicroMaterials, Germany 2000.04
Research paper (conference, symposium, etc.), Single Work
-
リニアモータ搭載平面研削盤による高能率研削に関する研究
小林、稲崎、由井、堀越
日本機械学会論文集Ｃ編 ６６ ( ６４３ ) 312-316 2000.03
Research paper (conference, symposium, etc.), Joint Work
-
極微量切削液供給による切削加工
峯川、稲崎他4名
日本機械学会論文集 Vol.66 ( No.646 ) 324-329 2000
Research paper (conference, symposium, etc.), Joint Work
-
Grinding Monitoring System Based on Power and Acoustic Emission Sensors
B.Karpuschewski, M,Wehmeier, I.Inasaki
Annals of the CIRP Vol.49 ( No.1 ) 235-240 2000
Research paper (conference, symposium, etc.), Joint Work