Papers - Inasaki, Ichiro
-
潤滑油の粘性変化を考慮した静圧スラスト軸受の解析
青山，稲崎，米津
精密機械 Vol.45 ( No.2 ) 194 1979
Research paper (conference, symposium, etc.), Joint Work
-
The Relation Between the Wear of Grain Cutting Edges and their Metal Removal Ability in Coated Abrasive Belt Grinding
J.SHIBATA, I.INASAKI, S.YONETSU
Wear Vol.55 331-344 1979
Research paper (scientific journal), Joint Work
-
Regenerative Chatter Behavior during One Cycle of Cylindrical Plunge Grinding
K.TAKAYANAGI, I.INASAKI, S.YONETSU
Bulletin of the JSPE Vol.12 ( No.3 ) 121-126 1978.09
Research paper (conference, symposium, etc.), Joint Work
-
旋削加工における最適化適応制御
貴島，稲崎，米津
日本機械学会論文集 Vol.44 ( No.385 ) 3251 1978.09
Research paper (conference, symposium, etc.), Joint Work
-
Regenerative Chatter during Cylindrical Traverse Grinding
T.SHIMIZU, I.INASAKI, S.YONETSU
Bulletin of the JSME Vol.21 ( No.152 ) 317-323 1978
Research paper (conference, symposium, etc.), Joint Work
-
Optimization of Turning Operation
S.YONETSU, I.INASAKI, T.KIJIMA
Manufacturing Enginee-ring Transactions 17 1978
Joint Work
-
Analysis and Optimization of Hydrostatic Journal Bearings using FEM
I.TAKAHASHI, I.INASAKI, S.YONETSU
Bulletin of the JSPE Vol.12 ( No.1 ) 33-38 1978
Research paper (conference, symposium, etc.), Joint Work
-
Effects of Oil Supply Method and Pad Configuration on Static and Dynamic Characteristics of Hydrostatic Thrust Bearings
T.AOYAMA, I.INASAKI, S.YONETSU
Bulletin of the JSPE Vol.12 ( No.2 ) 79 1978
Research paper (conference, symposium, etc.), Joint Work
-
静圧スラスト軸受の最適動作条件
青山，稲崎，米津
精密機械 Vol.44 ( No.8 ) 92-98 1978
Research paper (conference, symposium, etc.), Joint Work
-
Optimierung hydrostatischer Achslager bei Werkzeugmaschinen
I.INASAKI
Werkstatt und Betrieb Vol.111 ( No.9 ) 559 1978
Research paper (scientific journal), Single Work
-
Regenerative Chatter in Cylindrical Plunge Grinding
I.INASAKI, K.TONOU, S.YONETSU
Bulletin of the JSME Vol.20 ( No.150 ) 1648 1977.12
Research paper (conference, symposium, etc.), Joint Work
-
Regenerative Chatter in Grinding
I.INASAKI, S.YONETSU
Proc. of the 18th MTDR Canf 1977.09
Research paper (conference, symposium, etc.), Joint Work
-
Selbsterregte Ratterschwingungen beim Schleifen, Methoden zn ihren Unteruckung
I.INASAKI
Werkstatt und Betrieb Vol.110 ( No.8 ) 521 1977.08
Single Work
-
Inprovement in Dimensional Accura-cy of a Surface Belt Grinder
J.SHIBATA, C.T.LIN, I.INASAKI, S.YONETSU
Proc. of the 2nd ICPEC anf 318 1977.07
Research paper (conference, symposium, etc.), Joint Work
-
A Study on the Tool-life in Abrasive Belt Machining
J.SHIBATA, I.INASAKI, S.YONETSU
Proc. of the ICPE (New Delhi) vi 21 1977.07
Research paper (conference, symposium, etc.), Joint Work
-
円筒トラバース研削における自励振動
清水，稲崎，米津
日本機械学会論文集 Vol.43 ( No.370 ) 2343 1977.06
Research paper (conference, symposium, etc.), Joint Work
-
Studies on the Forced Vibration during Grinding
T.SHIMIZU, I.INASAKI, S.YONETSU
Bulletin of the JSME Vol.20 ( No.142 ) 475-482 1977.04
Research paper (conference, symposium, etc.), Joint Work
-
Optimization of Turning Operation
S.YONETSU, I.INASAKI, T.KIJIMA
Society of Manufacturing Engeneers Technical Paper MR77-202 1977.03
Joint Work
-
Ratterschwingungen beim Schleifen, Methoden sur ihrer Underdrueckung
INASAKI ICHIRO
Werk und Betrieb 110 ( 8 ) 521-524 1977
Research paper (scientific journal), Single Work
-
静圧スラスト軸受の振動特性
青山，稲崎，米津
精密機械 Vol.43 ( No.4 ) 439 1977
Research paper (scientific journal), Joint Work