Papers - Inasaki, Ichiro
-
Polishing and Ultraprecision Machining of Semiconductor Substrate Materials
V. C. Venkatesh, I. Inasaki, H. K. Toenshoff, T. Nakagawa, and I. D. Marinescu
Annals of the CIRP Vol.44/2 611-618 1995.08
Joint Work
-
Tool Condition Monitoring - The Status of Research and Industrial Application
G. Byrne, D. Dornfeld, I. Inasaki, G. Ketteler, W. Koenig and R. Teti
Annals of the CIRP Vol.44/2 541-567 1995.08
Joint Work
-
超砥粒ホイールのトポグラフィ測定
鈴木 勝, 稲崎一郎
日本機械学会論文集（編） Vol.61 ( No.585 ) 249-255 1995.05
Research paper (conference, symposium, etc.), Joint Work
-
超砥粒ホイールのトポグラフィ測定
鈴木勝、稲崎一郎
日本機械学会論文集（Ｃ編） Vol.61 ( No.585 ) 249-255 1995.05
Research paper (conference, symposium, etc.), Joint Work
-
研削条件設定における学習モデルの研究
坂倉守昭、稲崎一郎
日本機械学会論文集（Ｃ編） Vol.61 ( No.585 ) 346-351 1995.05
Research paper (conference, symposium, etc.), Joint Work
-
Simulation of Single Point Machining of Polycrystalline Metals by Molecular Dynamics
R. Rentsch, I. Inasaki
International Progress in Precision Engineering 347-350 1995.05
Joint Work
-
Simulation of Single Point Machning of Polycrystalline Metals by Molecular Dynamics
R.Rentsch,I.Inasaki
International Progress in Precision Engineering 347-350 1995.05
Joint Work
-
研削条件設定における学習モデルの研究
板倉守昭, 稲崎一郎
日本機械学会論文集（編） Vol.61 ( No.585 ) 346-351 1995.05
Research paper (conference, symposium, etc.), Joint Work
-
Monitoring Technology for an Intelligent Grinding System
VDI Berichte1179 31-45 1995.03
Single Work
-
Monitoring Technologies for an Intelligent Grinding System
INASAKI ICHIRO
VDI Berichte ( 1179 ) 31-45 1995
Research paper (conference, symposium, etc.), Single Work
-
アコースティックエミッションセンサを用いた回転工具損傷の検出
萱場英樹、稲崎一郎
日本機械学会論文集（Ｃ編） Vol.60 ( No.580 ) 368-373 1994.12
Research paper (conference, symposium, etc.), Joint Work
-
高分子圧電材料を用いた三次元測定機用接触式プローグの開発
篠田智寿、稲崎一郎、中村哲夫
日本機械学会論文集（Ｃ編） Vol.60 ( No.580 ) 210-215 1994.12
Research paper (conference, symposium, etc.), Joint Work
-
Architecture of Knowledge-Base and Management System for the Cylindrical Grinding Operations
G.H. Kim, I. Inasaki, J.K. Lee and J.H. Kang
Advancement of Intelligent Production, Elsevier Science 449-454 1994.10
Joint Work
-
Application of Artificial Intelligence in Grinding
W.B. Rowe, L. Yan, I. Inasaki, S. Malkin
Annals of the CIRP Vol.43 ( No.2 ) 521-531 1994.10
Joint Work
-
Molecular Dynamics Simulation for Abrasive Processes
R. Rentsch and I. Inasaki
Annals of the CIRP Vol.43 ( No.1 ) 327-330 1994.10
Joint Work
-
Architecture of Knowledge-Base and Management System for the Cylindrical Grinding Operations
Kim,G.H., Inasaki,I., Lee,J.K. and Kang,J. H.
Advancement of Intelligent Production, Elsevier Science 1994.09
Joint Work
-
Application of Artifitial Intelligence in Grinding
Rowe,W.B., Yan,L., Inasaki,I. and Malkin,S.
Annals of the CIRP Vol.43 ( No.2 ) 1994.08
Joint Work
-
Molecular Dynamics Simulation for Abrasive Processes
Rentsch,R. and Inasaki,I.
Annals of the CIRP Vol.43 ( No.1 ) 327- 330 1994.08
Joint Work
-
５軸マシニングセンサにおける組立誤差同定法
坂本重彦，稲崎一郎
日本機械学会論文集（Ｃ編） Vol.60 ( No.575 ) 271-279 1994.07
Research paper (conference, symposium, etc.), Joint Work
-
５軸マシニングセンタにおける組立誤差同定法
坂本重彦、稲崎一郎
日本機械学会論文集（Ｃ編） Vol.60 ( No.575 ) 271-279 1994.07
Research paper (conference, symposium, etc.), Joint Work