Papers - Inasaki, Ichiro
-
Dressing of Resinoid Bonded Diamond Grinding Wheel
稲崎一郎
Annals of the CIRP Vol.38 ( No.1 ) 315 1989.08
Single Work
-
Development of a Spindle System with an Adjustable Preload Mechanism Using a Hydraulic Actuator
N.Minami, T.Aoyama, I.Inasaki
3rd International Conference on Advances in Manufacturing Technology 1989.08
Joint Work
-
Learning Control of a Parallel-Link Direct-Drive Robot Manipulator
Y.Konishi, T.Aoyama, I.Inasaki
Robotics Vol.5 ( No.2 ) 127 1989.07
Research paper (conference, symposium, etc.), Joint Work
-
内面研削のサイクル最適化に関する 研究
西村，稲崎，山本
日本機械学会論文集（Ｃ編） Vol.55 ( No.515 ) 1808 1989.07
Research paper (conference, symposium, etc.), Joint Work
-
Application of Porous Ceramic Materials to Externally Pressurized Air Bearings
T.Aoyama, I.Inasaki
Proceedings of the 5th International Congress on Tribology Vol.1 253 1989.06
Research paper (conference, symposium, etc.), Joint Work
-
ＡＥセンサと磁性流体を用いたエンドミルのチッピング検出システムの 開発
稲崎，T.Blum, 鈴木，板垣，佐藤
システム制御情報学会論文誌 Vol.1 ( No.6 ) 210 1989.06
Research paper (conference, symposium, etc.), Joint Work
-
ＡＥセンサを用いたころがり軸受の損傷監視
李，稲崎
トライボロジスト Vol.34 ( No.4 ) 278 1989.04
Research paper (conference, symposium, etc.), Joint Work
-
Development of an Oil-Air Lubri-cation System with a Piezoelectric Nozzle for Machine tool Spindles
T.Aoyama, I.Inasaki, S.Tsutsui, T.Shimizu
JSME International Journal(Ⅲ) Vol.32 ( No.2 ) 259 1989.02
Research paper (conference, symposium, etc.), Joint Work
-
ハイブリッドテーブルシステムの開発
船越，青山，稲崎，三輪
日本機械学会論文集（Ｃ編） Vol.55 ( No.515 ) 174 1989.01
Research paper (conference, symposium, etc.), Joint Work
-
Instability Analysis of Groove-Compensated Journal Air Bearings
G.Lin, T.Aoyama, I.Inasaki
JSME International Journal 32 ( 1 ) 100-105 1989
Research paper (conference, symposium, etc.), Joint Work
-
パラレルリンク形ダイレクトドライブロボットの学習制御
小西，青山，稲崎
日本機械学会論文集(C) Vol.55 ( No.510 ) 382 1989
Research paper (conference, symposium, etc.), Joint Work
-
多孔質セラミックス静圧空気軸受の負荷特性
小山，青山，稲崎
日本機械学会論文集(C) Vol.55 ( No.511 ) 750 1989
Research paper (conference, symposium, etc.), Joint Work
-
超硬合金の放電・超音波複合加工
相田、稲崎、小林
日本機械学会論文集（Ｃ） 55 ( 509 ) 197-200 1989
Research paper (conference, symposium, etc.), Joint Work
-
Surface, Cylindrical and Internal Glinding of Advanced Ceramics
C.Chen, Y.Jung, I.Inasaki
Grinding Fundamentals and Applications Vol.39 201-211 1989
Research paper (conference, symposium, etc.), Joint Work
-
Trajectory Generation and Control of a Five-Bar-Link Parallel Direct-Drive Robot
Y.Konishi, T.Aoyama, I.Inasaki
Robotics and Computer-Integrated Manufacturing Vol.14 ( 3 ) 395-402 1988
Research paper (scientific journal), Joint Work
-
電歪素子ノズルを用いた工作機械用高速主軸のオイルエア潤滑
筒井，青山，稲崎，清水
日本機械学会論文集(C) Vol.54 ( No.503 ) 1572 1988
Research paper (conference, symposium, etc.), Joint Work
-
表面絞り形ジャーナル空気軸受のホワール解析
林，青山，稲崎
日本機械学会論文集(C) Vol.54 ( No.503 ) 1584 1988
Research paper (conference, symposium, etc.), Joint Work
-
Piezoelectric Actuator for High- Speed Spindle Systems
T.Aoyama, I.Inasaki
Proc. of the 4th Beannial International Manufacturing Technology Conference Vol.12 115 1988
Research paper (conference, symposium, etc.), Joint Work
-
Development of a Spindle System with an Adjustable Preload Mechanism Using a Piezoelectric Actuator
S.Tsutsui, T.Aoyama, I.Inasaki
JSME International Journal(Ⅲ) Vol.31 ( No.3 ) 593-597 1988
Research paper (conference, symposium, etc.), Joint Work
-
AE Monitoring System for the Detection of Single-Point and Multi-Point Cutting Tool Failures
T.Blum, I.Suzuki, I.Inasaki
Proc. of the 9th International Acoustic Emission Vol.7 ( 4 ) 179-184 1988
Research paper (conference, symposium, etc.), Joint Work